[جذر] StickMount APK
وصف
Automatically mount and dismount USB sticks on various devices like the Galaxy Nexus, Nexus 7 and Nexus 10. The Nexus 4 is not supported – this is an issue with the device, not with StickMount !
!!! يتطلب الجذر !!!
Various Nexus and “stock Android” devices do not automatically “mount” mass storage devices (such as USB sticks). StickMount has been made to solve this problem, and give you access to the files on your USB connected storage from all your apps.
StickMount is known to work on many devices, but is built *only* with *Nexus* devices in mind.
Once StickMount is installed and you connect a USB stick with a “USB host / OTG cable”, the device will show you a popup if you want to open StickMount. It is advised to tell the device that you want to do this by default.
If you have just installed StickMount and you already had a USB stick connected, you must manually launch the program, or disconnect/reconnect the USB stick for StickMount to start working.
Mass storage devices are mounted to “/sdcard/usbStorage/xxxx/”.
—– (طليعة) Kill apps preventing unmount —–
Sometimes an app has a file in use located on the USB device, and won’t let go of it. This can prevent StickMount from unmounting the USB device. It will seem like the device stays connected (this is harmless). StickMount Pro provides an option that attempts to kill (terminate) all the apps that are preventing the unmount from succeeding.
—– (طليعة) Media scan —–
StickMount Pro supports triggering the media scanner on each (un)mount action. This will automatically make the files on your USB device available in apps like Gallery and Music. Please note that the media scanner is not a visible process on all Android devices – it might actually work silently in the background without any visual cues. It may take a minute for your files to show up, so don’t panic if they don’t show immediately.
Even if you have this option enabled, you can prevent folders from being scanned by placing an empty file called “.nomedia” in that folder. If you put it in the root of the USB device, the entire device will not be scanned.
—– (طليعة) Mount as partition label —–
Instead of using the block device name for the partition, use the partition label as mount name, falling back to uuid or block device name if the label is unavailable.
—– (طليعة) Create symbolic links —–
Create symbolic links in /mnt and /storage to the actual mounts in /sdcard/usbStorage/
—– Filesystem support —–
The filesystems supported depends on your device firmware. On most devices, at least vfat/fat/fat32 and ext2/3/4 are supported. On the latest Android versions, ntfs is also supported in read-only mode. Some devices also support exfat out the box, but most do not.
StickMount can utilize the “ntfs-3g” و “mount.exfat-fuse” binaries to add support for ntfs (untested) and exfat, but these are not included. If you place the “ntfs-3g” أو “mount.exfat-fuse” files in the root of your internal storage ( /sdcard ), StickMount will automatically use them.
You can find the needed files here:
ntfs-3g: http://forum.xda-developers.com/attachment.php?attachmentid=1145436&stc=1&d=1340293802
mount.exfat-fuse: http://forum.xda-developers.com/attachment.php?attachmentid=806200&d=1323109372
—– Troubleshooting —–
For some users, the app appears not to work, while in fact it is the device itself or the cable not working. One OTG cable is not the other OTG cable. If you have a USB stick with a light on it, it should light up when you connect it to the Galaxy Nexus using your OTG cable. If it does not, either your cable or your Nexus is faulty. 99 بعيدا عن المكان 100 times it is going to be your cable. That the cable works fine with another device does not mean anything! Cables known to work on a one devices may not work on another device.
SD card unmounting: If your SD card unmounts when unmounting a USB device, you have a bug in your kernel. This is *not* a bug in StickMount !
فئة: أدوات
نظام التشغيل: ذكري المظهر
سعر: حر
ما هو الجديد
– (C) 2017
– Handle HTTP redirects when downloading additional tools
آراء / رأي المستخدم:
- تطبيق رائع. Very useful. However doesn’t work properly with Android 8.1 on Google Pixel. Or unofficial LineageOS 15.1. It mounts the device…but no file managers can properly read the contents. Can’t make updates to files or open them in other apps. Please fix.
- رقم, the app is not permitted repeatedly to lose sight of the card and go looking for it during the transfer on hundreds of files. Nor to stretch a process that should take under ten minutes out to a matter of more than three hours.
- Is it possible that it supports magisk instead of supersu? It’s a great app anyway, especially for us who having devices that do not have external SD slot…
[جذر] StickMount FILE INFORMATION
اسم الحزمة: eu.chainfire.stickmount
إصدار: 3.50 (350)
حجم الملف: 87.9 كيلو بايت
محدث: يمشي 20, 2018
الحد الأدنى من إصدار Android: ذكري المظهر 4.0 (سندويش الايسكريم, API 14)
تحميل [جذر] StickMount 3.50 (350) APK
- تحميل [جذر] StickMount 3.50 (350) APK – 87.9 كيلو بايت
الإصدارات القديمة
[جذر] StickMount 3.33
إصدار: 3.40 (340)
تم الرفع: يمشي 24, 2016 في 9:08مساءا بتوقيت جرينتش +00
حجم الملف: 87.65كيلو بايت (89,756 بايت)
الحد الأدنى من إصدار Android: ذكري المظهر 4.0+ (سندويش الايسكريم, API 14)
[جذر] StickMount 3.26
إصدار: 3.26 (326)
تم الرفع: ديسمبر 15, 2014 في 1:31صباحا بتوقيت جرينتش +00
حجم الملف: 74.95كيلو بايت (76,758 بايت)
الحد الأدنى من إصدار Android: ذكري المظهر 4.0+ (سندويش الايسكريم, API 14)
[جذر] StickMount 3.33
إصدار: 3.33 (333)
تم الرفع: شهر نوفمبر 21, 2015 في 3:23مساءا بتوقيت جرينتش +00
حجم الملف: 86.52كيلو بايت (88,604 بايت)
الحد الأدنى من إصدار Android: ذكري المظهر 4.0+ (سندويش الايسكريم, API 14)
